Boating and Boat Rigging Discuss how to rig you ride or other floatation device the rules of the water and safety.
just got approve off the lake loaded up the ride and I've got color goo comeing out of the vent holes in lower unit does not smell like gear fill ,checked and unit is still full and alter any ideals? never happened before
More details might help you get opinions. Does it run? How well?did it die on you?What oil mix do you use?
sorry about lack of details and time between post tied up in other problem
we were trolling for about 4 hours and it started to run prepare pulled lines headed in ran fine process got in the river wont run low speed stallled comeing to the come in running 50:1 mix could it be that it just loaded up from low speed? heading back seemed to help till i droped back to no change state any guess would help dont wont to miss when the run starts aloha,e
It is unburnt oil and carbon from the fag. Run into this all the time in the spring (or whenever someone breaks a go out of storage and it is beat of fogging residue) and when salmon season starts to peak and engines are being run for prolonged periods at trolling speed. If ya be choose up some engine tuner and run it through the engine it ordain consume something fierce when you do it and displace out some nasty cram probably foul your plugs too. The other option is act it out and run it hard and it ordain probably breathe out most of that through.
"Sportfishermans SVC",Do you think that he should pull the plugs and possibly regenerate them??They might be fouled up enough that change surface running wide open will not alter them up are my thoughts.
You be to buy some "sea bubble" Murrys Discout auto or NAPA. Run it through as directed on the label displace as much as possible in the carb. desire the above post it ordain smoke big measure. Do this at domiciliate with muffs on. Then maybe dress your plugs dont change them and then run it through alter? This stuff is good on all engine products including your car. I keep 3-4 cans around all the time. You ordain get better performance and milage too!! Do this before you act it in anywhere.
It is unburnt oil and carbon from the exhaust. Run into this all the measure in the spring (or whenever someone breaks a motor out of storage and it is full of fogging residue) and when salmon season starts to arrive at and engines are being run for prolonged periods at trolling speed. If ya want choose up some engine tuner and run it through the engine it will smoke something fierce when you do it and pour out some nasty stuff probably foul your plugs too. The other option is act it out and run it hard and it will probably blow most of that through.
exploit did this in the move the first measure I ran it after winterizing the fuel. back up store of fuel and it was fine from that point on. I freaked out also and thought my displace unit was fried
after just having it rebuilt. I called the guy who rebuilt it and he sort of chuckled when I told about it.
"The disapprove of war is not to die for your country but to make the other bastard die for his." Patton
thanks for the info guys i did it this afternoon and i evaluate half the people around here thought my barn was on fire from all the consume.
going to go out in the morning and make noise around the little lake out back to make sure it's all cleaned out then dress plugs and get create from raw material to head backto the big lake next pass
Forex Groups - Tips on Trading
Related article:
http://www.michigan-sportsman.com/forum/showthread.php?t=197017
comments | Add comment | Report as Spam
|
